Red Coated Aluminium Sheet
video

Red Coated Aluminium Sheet

Place of Origin Henan, China
Brand Name ECER
Certification ISO 9001:2015, SGS
Model Number 1060,3003,5052
Minimum Order Quantity 3 Tons
Price USD 2,300-3,200 / Ton
Packaging Details Eye to sky or eye to wall, wrapped with waterproof paper and PVC film, protected by wooden pallet and steel strips
Delivery Time 7-15 days for stock widths, 20-30 days for custom widths
Payment Terms T/T,D/P,D/A,L/C
Supply Ability 5000 Tons per Month
Send Inquiry
Product Introduction

Product Description

 

Red coated aluminium sheet is a pre-painted flat product in which a factory-applied red coating is bonded to an aluminium substrate through a continuous coil-coating line. The red finish is not a decorative afterthought - it is a functional specification, chosen for visibility, brand identity, warning signalling, or architectural accent, and it must hold that colour under UV exposure, moisture, and temperature cycling.

 

The performance of a red coated aluminium sheet depends on two variables: the coating system and the substrate alloy. For exterior exposure, PVDF (fluorocarbon) coating at ≥25 μm is the standard specification - it resists chalking, fading, and gloss loss for 15–30 years under normal conditions, with salt-spray resistance exceeding 1,000 hours in ASTM B117 testing. For interior or sheltered applications, PE (polyester) coating at ≥18 μm provides adequate protection at lower cost. The aluminium substrate is typically 1050, 1060, 1100, 3003, or 5052, selected according to formability, strength, and corrosion requirements; 3003 and 5052 are preferred for exterior red coated aluminium sheet where the coating may be damaged and the substrate must resist corrosion on its own.

 

A red coated aluminium sheet is supplied in coil, strip, or cut-to-length sheet form. Thickness typically ranges from 0.20 mm to 6.0 mm, with width up to 1,800 mm; RAL colour matching - including RAL 3000, 3002, 3011, 3020, and custom red shades - is standard practice. The red coating can be specified in gloss levels from 10 to 90 units (EN ISO 2813), allowing the same red coated aluminium sheet to serve matte architectural cladding or high-visibility signage.

 

product-750-1058

 

 

Specifications

PVDF red coating holds colour under exterior UV exposure · Salt-spray tested ≥1,000 hours for coastal and industrial atmospheres · RAL and custom red matching for brand and safety colour consistency · Coil, strip, or sheet form supports both roll-forming and flat-panel fabrication.

 

 Parameter Red Coated Aluminium Sheet
 Alloy 1050, 1060, 1100, 3003, 5052
 Temper H14, H24, H16, H26, O
 Thickness 0.20 – 6.0 mm
 Width Up to 1,500 mm
 Coating Type PVDF (exterior) / PE (interior)
 Coating Thickness (Front) PVDF ≥25 μm / PE ≥18 μm
 Pencil Hardness ≥2H–3H
 Adhesion 5J (EN ISO 2409)
 T-bend ≤2T
 Salt Spray ≥1,000 hours (ASTM B117)
 Colour Range RAL reds, custom shades
 Gloss 10–90 (EN ISO 2813)
 Standards ASTM B209, EN 13523 (coil-coated metal)

product-718-907

 

 

Applications

 

Red coated aluminium sheet is specified where colour is part of the function - not simply a finish choice. The red tone provides contrast, warning, brand recognition, or architectural emphasis, and the coating must preserve that signal over the service life of the part.

 

Architectural Cladding & Roofing Accents. Red coated aluminium sheet in PVDF is used for façade panels, column covers, soffits, canopies, and roof trim where a defined red accent is required against neutral backgrounds. The coating's UV and moisture resistance allows the red coated aluminium sheet to hold colour on south-facing or rain-exposed elevations; 3003 or 5052 substrate is specified where coastal salt exposure is present.

 

Signage, Fascia & Retail Identity. Red is a high-visibility signage colour, and red coated aluminium sheet in PE or PVDF serves fascia panels, shop-front surrounds, directional signs, and display platforms. The smooth, uniform red surface accepts vinyl cutting, screen printing, and CNC routing; the coating adhesion (5J, EN ISO 2409) ensures the red finish does not lift at cut edges or fastener points.

 

Transport & Warning Surfaces. Red coated aluminium sheet is used in vehicle interior panels, trailer trim, and industrial equipment guards where red signals hazard or demarcation. The light weight of aluminium (approximately one-third that of steel) reduces the structural penalty of adding a coloured panel, while the coating resists oils, detergents, and road splash.

 

Interior Feature Panels & Appliances. For interior walls, ceilings, elevator cabs, and appliance fascia, red coated aluminium sheet in PE coating provides the colour effect at a lower coating cost than PVDF. The red finish can be matched to brand palettes or architectural schedules, and the sheet is supplied in cut-to-length form for direct installation.

 

Industrial & HVAC Housings. Red coated aluminium sheet also serves equipment housings, HVAC access panels, and electrical enclosure covers where a durable, cleanable red surface is required without a post-paint step. The coating resists chalking and gloss loss under indoor fluorescent and LED exposure.

 

product-750-1276

 

Customization

 

  • Coating system: PVDF ≥25 μm for exterior, coastal, or high-UV red coated aluminium sheet; PE ≥18 μm for interior or sheltered signage at a lower price point. Back coating 5–10 μm available.
  • Red shade: RAL 3000 (flame red), RAL 3002 (carmine red), RAL 3011 (brown red), RAL 3020 (traffic red), and custom shades matched to Pantone or physical samples. Gloss from 10 (matte) to 90 (high gloss) specified per red coated aluminium sheet order.
  • Alloy & temper: 1100-H24 for general fabrication; 3003 or 5052 for exterior and coastal red coated aluminium sheet requiring substrate corrosion reserve; O temper for forming before colour retention is checked.
  • Form & size: Coil (ID 405/505/610 mm), strip, or cut-to-length sheet. Thickness 0.20–1.50 mm; width up to 1,800 mm.
  • Protective film: PE/PVC film available on the coated face for transit and fabrication protection.
  • MOQ: 2–5 MT per size/colour for red coated aluminium sheet; trial quantities considered.

 

product-750-1049

 

Support and Services

 

Pre-sale support for red coated aluminium sheet covers coating selection by exposure class: send the project location, façade orientation, and whether the red surface will face direct UV and rain - the team confirms whether PVDF or PE is the appropriate system and whether 3003 or 5052 substrate should replace 1100. Mill Test Certificate (EN 10204 3.1) and coating performance data - adhesion, T-bend, pencil hardness, salt-spray results - accompany every red coated aluminium sheet shipment. Colour samples (A4 or full-sheet) are provided for approval before bulk production. A 12-month quality response window applies to red coated aluminium sheet, with batch traceability through coil ID and retained coated samples. Export documents and third-party inspection (SGS, BV) coordination are handled in-house. Payment: T/T, L/C at sight. 

 

product-718-1107

 

Packing and Shipping

 

Red coated aluminium sheet is packed with the coated face protected by PE/PVC film or interleaving paper, then wrapped in waterproof paper and plastic film and secured on wooden pallets or in plywood cases. Edge protectors and corner guards prevent coating damage in transit; the coated surface is not stacked face-to-face without interleaving. Labels show alloy, temper, thickness, width, RAL shade, coating type, lot number, and net weight.

 

A 20′ container loads approximately 18–22 MT of red coated aluminium sheet; 40′ loads 24–26 MT. Primary loading port: Qingdao; Tianjin and Shanghai on request. FOB, CFR, and CIF accepted. Lead time: 10–20 days for standard RAL reds in stock thicknesses; 20–30 days for custom shades or PVDF red coated aluminium sheet production.

 

product-750-780

 

 

Hot Tags: red coated aluminium sheet, China red coated aluminium sheet manufacturers, suppliers, factory, aluminum flat sheet, color coated aluminum alloy sheet, color coated aluminum panel sheet, pe coated aluminum sheet, prepainted aluminum roofing sheet, pvdf coated aluminum sheet

Send Inquiry

whatsapp

Phone

E-mail

Inquiry